DIY Wooden Dollhouse Plan with Full Dimensions Side Back and Top Views

DIY Wooden Dollhouse Plan (Two-Storey) — Full Dimensions & Views

Introduction

This DIY wooden dollhouse is a classic woodworking project designed as a durable, child-friendly playhouse. It features a simple two-storey structure, an open-back design for easy access, and a removable roof for interactive play. Access over 16,000 woodworking plans 

Built mainly from pine wood and MDF, it is strong, lightweight, and easy to customise with paint, wallpaper, or miniature furniture.

Overall Dimensions

  • Width: 70 cm
  • Depth: 30 cm
  • Total Height: 46 cm
  • Floor height per level: 18 cm
  • Roof height allowance: ~10 cm

Materials Required

  • 12–18 mm MDF sheets (walls, floors, roof)
  • 12–20 mm pine wood strips (frame structure)
  • Wood glue (non-toxic recommended)
  • Small wood screws (20–40 mm)
  • Sandpaper (120–240 grit)
  • Child-safe, non-toxic paint or acrylic finish
  • Wood filler (for smoothing joints)
  • Optional: hinges or magnets (for removable roof section)

Structural Overview

Design Features

  • Two open floors for furniture placement
  • Open back for full accessibility
  • Removable roof for interactive play
  • Small balcony on upper floor
  • Lightweight but reinforced frame

Parts Breakdown

1. Base Floor Panel

  • Size: 70 cm (W) × 30 cm (D)
  • Material: 12–18 mm MDF
  • Function: Main foundation of the dollhouse

Tip: Reinforce underside with pine strips to prevent bending.

2. Side Walls (Left & Right)

  • Quantity: 2 panels
  • Size: 46 cm (H) × 30 cm (D)
  • Material: MDF or pine frame with MDF infill
  • Function: Structural support and side enclosure

3. Back Frame (Open Design)

  • Style: Open-back (no full panel)
  • Optional: thin frame strips for edge support
  • Function: Allows easy access for play and cleaning

4. Floor Divider (Middle Level)

  • Size: 70 cm (W) × 30 cm (D)
  • Height from base: 18 cm
  • Material: MDF (reinforced with pine underneath)
  • Function: Separates ground floor and upper floor

5. Top Floor Ceiling / Roof Base

  • Same size as floor divider (70 × 30 cm)
  • Acts as second floor ceiling and roof support base
  • Reinforce with cross braces for strength

6. Roof Panels (Removable Design)

  • Two angled panels
  • Each approx: 35 cm (W) × 30–35 cm (slanted length)
  • Angle: 30–45° pitch
  • Function: Decorative roof that can be lifted off

Optional: Add small dowels or magnets to keep roof aligned.

7. Front Opening Sections

  • Front is divided into open “rooms”
  • Suggested framing:
    • Vertical supports every 20–25 cm
    • Open windows/door cut-outs for play access

8. Balcony (Upper Floor Feature)

  • Size: 20 cm (W) × 8–10 cm (D)
  • Material: MDF strip + small pine guard rails
  • Height: Attached to upper floor front edge
  • Function: Decorative play feature

Assembly Instructions

Step 1: Build Base Frame

  • Attach side walls to base panel using glue and screws.
  • Ensure 90° alignment for stability.

Step 2: Install Middle Floor

  • Measure 18 cm from base and fix internal supports.
  • Secure floor divider panel evenly across structure.

Step 3: Build Upper Structure

  • Attach side walls up to full 46 cm height.
  • Reinforce internal joints with pine strips.

Step 4: Create Open Front Sections

  • Cut out door and window openings in front framing.
  • Sand all edges carefully for child safety.

Step 5: Install Roof Structure

  • Attach angled roof supports.
  • Fit removable roof panels (do not permanently glue).

Step 6: Add Balcony

  • Fix balcony platform to upper floor front edge.
  • Add small railings using thin wooden strips.

Step 7: Sanding & Painting

  • Sand all surfaces thoroughly (no sharp edges allowed).
  • Apply child-safe, non-toxic paint or water-based finish.
  • Allow full curing before use.

Side / Back / Top View Description

Front View

  • Two-storey open façade
  • Central open rooms with window cut-outs
  • Balcony on upper floor

Side View

  • 46 cm height profile
  • Clear 18 cm floor separation
  • Slanted roof line visible

Back View

  • Fully open access (no rear wall)
  • Visible floor structure and supports

Top View

  • Rectangular footprint: 70 × 30 cm
  • Roof panels covering upper section
  • Symmetrical layout for balanced structure

Safety Notes

  • Always use non-toxic paints and finishes
  • Sand all edges thoroughly (no splinters)
  • Avoid small detachable parts for toddlers under 3 years
  • Ensure roof is securely aligned but easy to remove safely

Final Result

A durable and charming wooden dollhouse that encourages creative play while showcasing clean woodworking craftsmanship. Its open design makes it easy to decorate, furnish, and enjoy for years.

Comments

Post a Comment

Popular posts from this blog

16,000 Woodworking Plans: Everything You Need to Build Anything

Image
If you've ever stared at a blank workshop wall wondering what to build next, 16,000 woodworking plans is the answer to that problem. Permanently. That's the size of Ted's Woodworking, one of the most comprehensive plan libraries available to hobbyists and serious woodworkers alike.  Whether you're a weekend DIY cutting your first dovetail joint or a seasoned craftsman looking for your next challenge, having 16,000 projects at your fingertips changes how you approach the craft entirely.  👉 Access Over 16,000 Woodworking Plans What 16,000 Plans Actually Looks Like We're talking about plans for furniture, garden structures, storage solutions, toys, cabinets, sheds, workbenches, and more. Every plan comes with step-by-step instructions, cut lists, materials lists, and detailed diagrams so you're never guessing. You pick the project, follow the plan, and build. The variety alone is staggering. Want a rustic farmhouse dining table? It's there. A backy...
Read more

DIY Miter Saw Workstation Setup

Image
DIY Miter Saw Workstation Setup A DIY miter saw workstation setup is a high-efficiency cutting station designed to improve accuracy, speed, and safety when working with long boards and repetitive cuts. With extension tables, stop blocks, a T-track system, dust collection integration, and a mobile base, this workstation turns a basic miter saw into a precision production tool. Access over 16,000 woodworking plans  This setup is ideal for furniture makers, carpenters, and DIY woodworkers who want a clean, organized, and professional cutting station. Main Features of the Workstation Core Components Central miter saw platform Extension tables (left & right) Adjustable stop block system T-track fence system Dust collection setup Mobile base with wheels 1. Extension Tables for Long Cuts Extension wings support long boards during cutting. Features Level with saw bed Smooth sliding surface Strong structural support Benefits Prevents material sagging...
Read more

DIY Garage Workbench with Tool Storage

Image
DIY Garage Workbench with Tool Storage A DIY garage workbench with tool storage is one of the most practical upgrades for any workshop. Combining a durable work surface, organized drawers, open shelving, pegboard tool storage, and caster wheels for mobility, this setup creates a highly efficient workspace for woodworking, repairs, assembly, and general DIY projects. Access over 16,000 woodworking plans  Perfect for DIY builders, mechanics, woodworkers, and hobbyists, this workstation keeps tools organized while providing a strong and reliable bench for everyday workshop tasks. Main Workbench Features Core Components Heavy-duty wooden work surface Storage drawers and cabinets Open lower shelves Pegboard tool organizer Mobile caster wheel base Reinforced structural frame 1. Main Work Surface The tabletop serves as the primary working area for cutting, assembly, and repairs. Recommended Dimensions Width: 150–240cm Depth: 60–80cm Height: 85–95cm ergono...
Read more